abachem 200

Semi Automated Biochemistry Analyzer


  • Features
  • Premium Chemistry Analyzer
  • Advanced Light Path Error Detection System
  • 5" LCD Display with Touch Panel
  • High Quality 18μL Flow Cell
  • Option for Adding Patient ID
Semi Automated Biochemistry Analyzer

Technical Specifications

Human Machine Interface : Touch Panel/ Keypad
Linear Measurement Range : 0.000 to 3.000 Absorbance unit (A)
Photometric Accuracy : ±2% or 0.07 whichever is higher, from 0 to 1.5 A
±3% from 1.5 A to 3.0 A
Drift : <0.007 A/hr
Photometric range : 2.2A
Optical Measurement : Photodiode
Filters
Type of Filter : Interference
Wave Length : 340, 405, 510, 546, 578 & 630 nm & Two Optional
Half bandwidth : 10nm ±2nm
Filter Selection : Automatic by Stepper Motor
Flow Cell
Sipping Volume : 300 to 1000 μl
Flow Cell Volume : 18 μl
Sipping mode : Automatic by specially designed Peristaltic Pump
Cuvette Volume : 500 μl
Temperature of Cuvette / flow cell Block
Method : By Peltier effect
Temperature : 25º C, 30º C and 37º C
Light Source : Tungsten Halogen
Warm up Time : 90 Sec.
Display : 5” Graphics LCD, Negative Blue, STN
Printer : Built in thermal printer, 20 Column
Memory : 64 KB - Non volatile RAM with Battery back up
Storage Capacity : 250 Open tests with 30 QC results/test (Normal and abnormal controls) and 2500 Patient results with patient ID
Analysis Mode : Absorbance, End point, Fixed time, Kinetic, Differential, Ratio, Coagulation
Concentration calculation : By factor or by standard
RS232 serial port : 9600 baud, 1 start, 8 data, 1 stop, no parity bits
Power
Wattage : 50 Watts
Voltage : 115 - 230 Volts ± 10 %, 50 - 60 Hz\
Operating Position : On horizontal, flat, rigid and vibration free surface
Operating Conditions
Temperature : from + 18° C to 35° C
Relative Humidity : up to 85 %
Storage Condition
Temperature : from - 10° C to + 60° C
Relative Humidity : up to 85 %
Enclosure : ABS Fire retardant
Size (cm) : 30 X 38 X 13.5 (l x b x h)
Weight : 5.5 Kgs. (Approx)